Most of the people use Wireless Routers and Modems at their homes for internet coverage. But if you do not use proper security on your wireless networks, this may give you doze of high internet bills. Mostly, people do not bother to change default settings of their network routers and make them easily accessible to anyone. Anyone can hop on to your network and cost you some money. Here are some tips and tricks to avoid these situations.
Wireless Home Networking – Tips And Tricks
1. Fix Connectivity Issues
It sounds crazy, but 95% of all Internet connectivity problems can be solved by rebooting (Restarting) both the router and the modem. Turn them both off, and then turn the Modem back on first. Once its “Sync” or signal light comes on, turn on your Router.
2. Use Encryption
You’ve probably heard this before, but it bears repeating: Always enable your router’s wireless security! Wired Equivalent Privacy (WEP) encryption is the oldest (and weakest) form of security; the newer (and stronger) Wi-Fi Protected Access (WPA) and WPA-2 are the best protection available today for home users.
3. Update Your Router’s Firmware
All routers include internal read-only chips with embedded instructions that can be updated by the manufacturer. Router manufacturers generally update a product’s firmware to increase performance as well as to resolve bugs and security issues, so it’s wise to keep your router’s firmware up- to-date. Check the manufacturer’s Web site for the latest updates.
4. Boost Your Wireless Signal
If walls and distance are causing wireless signal degradation, you can do a few things to boost it. Move your router to higher ground—the signal radiates downward. You can also try a signal extender (or repeater), which boosts the signal. Finally, high-gain antennas will work, but they only focus the signal in one direction.
5. Change Admin Password
Every router has a well-known default password that’s used to access the router’s browser-based configuration page. Most setup wizards will make you change this password, but not all do. If not, be sure to change it yourself to prevent unwanted hangers-on from changing your network’s settings. Go Back to Factory Settings If you’ve lost or forgotten your router’s login credentials, you can get around this predicament by resetting the router to its factory settings. Do this by holding down the button on the back of it for 30 seconds. Next, look in the manual for the default user name and password, and then change them on your router’s browser-based configuration page.
6. Disable SSID Broadcast
Unless you disable it, your router broadcasts its service set identifier (SSID)—the name of your network—which allows your neighbors to see (and attempt to gain access to) your network. Instead, disable broadcasting, making the network appear as “SSID not broadcast.” Access the unnamed network by typing in the SSID name when prompted.
7. Change Default SSID
Change your pre-defined, default SSID—leaving it as “Linksys,” for example, tells the world that you haven’t configured your router, which invites attackers.
8. Filter By MAC Address
Every piece of networking gear includes a unique “fingerprint” called a media access control, or MAC, address. You can configure your router to filter connections using these addresses so that only your computers can connect to your network. Most routers will show you connected devices, so adding an adapter’s MAC address is a one-click process.
9. Step Up To 5GHz
The majority of today’s networks operate in the crowded 2.4GHz frequency range, which is shared by
microwaves, cordless phones, and other home networks. To avoid possible interference, many new routers are capable of broadcasting at 5GHz, which has 23 wide-open channels as opposed to 2.4GHz’s three non- overlapping channels.
10. Limit Your Number Of DHCP Clients
Most people use their router as a DHCP server; when clients connect, the router dynamically assigns IP addresses from a large pool of addresses. Limiting that list to the number of clients in your home, however, will help prevent
interlopers from hopping onto your network.
11. Use Your Router’s Firewall
Two features make most hardware firewalls more powerful than software firewalls: Stateful packet inspection (SPI) and Network Address Translation (NAT). SPI examines packets’ content and behavior before granting access, and NAT hides all PCs connected to the router from the Internet, “Translating” their IP addresses into private ones that are unreachable from outside the firewall.
12. Change Your Channel
Wireless B and G (and some N) routers operate at the 2.4GHz frequency, which only has three non- overlapping channels: 1, 6 and 11. By default, your router will most likely be using one of these channels, and the bad news is so your neighbors’ routers as well. If you experience dropped connections, sluggish performance or both, a good first step is to switch the channel. If it’s set to channel 1, go to 11. If it’s set to 6, try either 1 or 11 for best results.
13. Let Windows Control Your Wireless Networks
If a network adapter’s software takes control of your wireless network, it
can be difficult to put Windows back in charge.
- First, click Start, then Run, then type services.msc.
- Scroll down to Wireless Zero Configuration and start the service.
- Right-click your wireless connection, select View Available Networks, and then click Advanced settings on the left.
- Click the Wireless Networks tab, and check “Use Windows to Configure my wireless network settings.”
14. Disable File Sharing In Public
If you’re in a public place with a Net connection, it’s a good idea to Disable File and Printer Sharing for Microsoft Networks. In the properties of your network adapter, un-check the appropriate box.
If you will take care of above things, your Wireless Networks will work fantastically. Enjoy, Have Fun!